On sale: $65.99
Retail Price:$89.99
You Save:$24.00(27%)

Choose Options

Joyetech has now launched the scaled-down version of the Cuboid—Cuboid Mini, along with the Cuboid Mini Atomizer in one complete starter kit. The Cuboid Mini Starter Kit comes with the new NotchCoilTM 0.25ohm DL (Direct Lung) atomizer head that brings you a great vaping experience. The NotchCoilTM lasts much longer and can be used under high wattage conditions. The Cuboid Mini has a similar design of the original Cuboid but it is now shrunk down significantly which allows you to grip the device much more easily. It is also now powered by a 2400mAh built-in battery, whose maximum output can be reached up to 80W. The Variable Temperature Control system features support for Nickel (Ni), Titanium (Ti), and Stainless Steel 316 (SS316) coils. The Cuboid Mini also features Bypass and Temperature Coefficient of Resistance (TCR) modes. This device may be charged and download future firmware updates via the Micro USB Port.

The Cuboid Mini Atomizer has a special oblong shape which perfectly matches the Cuboid Mini device. This TFTA-Tank (top filling and top airflow tank) allows the top section, coil to be removed and comes together in one solid unit. 

Features and Specs for Cuboid Mini 80W TC Device:
Dimensions: 3" x 1-3/8" x 7/8"(without Cuboid Mini Atomizer)
Spring-loaded Contact Pin
Stainless Steel 510 Threads
Battery Capacity: Built-in 2400mAh Battery
Operating Wattage: 1.0 - 80.0 W
Temperature Control: Nickel (Ni), Titanium (Ti), Stainless Steel 316 (SS316), TCR Modes
Temperature Range: 100-315°C / 200-600°F
Bypass (Direct Output Voltage) Mode
Resistance Range: 0.05-1.5ohm for Variable Temperature Control Mode
Resistance Range: 0.1-3.5ohm for Variable Wattage and Bypass Mode
Large 0.96" OLED Display Screen
Bottom Ventilation Holes
Micro USB Charging Port
Upgradeable Firmware
Stealth Function
Key Lock Function
Rotate 180 Display Mode
Short Circuit Protection
Low Battery Alert
Low Resistance Alert
Temperature Protection
Temperature Alert

Features and Specs for Cuboid Mini Atomizer:
Dimensions: 2" x 1-3/8" x 7/8" (Including Drip Tip and Threads)
510 Threaded
5.0ml liquid Capacity
Innovate Leak Resistant Cup Design
Tempered Glass Window
Convenient Top-Fill Feature
Top Airflow Control
Compatible with Cubis Atomizer Heads
Includes (1) NotchCoilTM 0.25ohm Direct Lung Atomizer Head
Includes (1) BF Rebuildable M&L Head
5 Stars
My New Cuboid Mini
In the interest of being completely forthcoming, I'll start out by saying I've only owned this setup for a few hours, and I'll update further when I get deeper into the mod. I came into the shop intending to purchase an Egrip II (nearly the same thing), but this fit my needs much better. For a kit that's as simple as this is to use, I did not expect even close to the quick ramp up times and sustained power it provides. The included NotchCoil is the only one I've used so far, but the draw is smooth and clean, medium to light throat hit, but very accurate. Battery has gone down to about 70 percent in about 4 hours, but in my excitement of a new mod, I'll admit to chain vaping. I expect this to have battery remaining at the end of a full day of regular vaping. The tank holds a MASSIVE 5ml, and you literally pour the juice into a .75" fill hole. It's impossible to miss. Then you drop the coil assembly in through the juice, and screw in. Nearly foolproof. Perfect for coming from a smaller "starter" setup or for the advanced vaper who wants a little more simplicity. The price was a little higher than I wanted to go, but I am satisfied with the value after my first half day of testing. I've yet to find any real cons with this kit. Thanks Infinite Fargo!
Did you find this helpful? 
Reviewed by:  from Fargo, ND. on 10/4/2016

Recently Viewed Items